Language

EN / CN

New experimental multifunctional fluidized bed

 

 

Product Function

 

A drying function: wet materials for negative pressure drying.

B granulation function: the granules made are more uniform, less fine powder and better fluidity.

C coating function: it can coat granules, micro-pills and drug powder with functional layer; it can also coat granules and micro-pills with drug dressing layer.

 

Product features

 

・ Compact structure of the equipment, smaller volume, less floor space, can be easily moved.

・ Airtight operating system to avoid cross contamination.

・ Air volume is controlled by frequency conversion fan, which has the advantages of low energy consumption and low noise.

・ Temperature control is precise with small fluctuation range.

・ 3 filter chambers take turns to clear the powder, which ensures the permeability of the filter bag under the condition of fluidization.

・ Introducing advanced grinding and polishing technology from Germany, the surface of the equipment is more exquisite.

・ Simple structure of the equipment, easy to disassemble and install, no dead angle, easy to clean.

・ Elaborately designed airflow distribution structure, more uniform airflow distribution, higher efficiency, more stable product quality and good reproducibility.

・  Simple electrical control, stable and reliable performance, easy maintenance and replacement of components.

・The airflow structure of experimental, pilot and production fluidized beds are all designed according to the same technical standard, so the parallel amplification and reproducibility of the products will be very good in the future.

 

 

 

Production type large capacity wet mixing granulator

 

 

Product Features

 

・ Inflatable sealing drive shaft, can be switched to water when cleaning. 

・ Fluidized granulation, granules are nearly spherical and have good flowability. 

・ Good reproducibility of granules from batch to batch.

・ Completed in the same closed container, dry mixing - wet mixing - pelletizing, process reduction, in line with cGMP requirements.

・ Speed and granulation time can be set.

・The rotation speed and pelletizing time can be set.

・The terminal torque can be set to determine the automatic operation.

・Wide range of applications, suitable for granulation of particles with different viscosity characteristics and particle sizes. 

・High-quality stainless steel material and German grinding and polishing technology, less material adhesion.

 

 

 

Other Options

 

・ Stirring paddle mechanical lifting.

・ Material temperature measurement.

・Operation curve of torque can be generated automatically.

・ Material tank illumination.

・ Inflatable sealing ring at the discharge port for sealing to the equipment behind (quick connecting seal).

・ Inflatable container seal.

・ Air-tight spout connector ・ Pneumatic switch for adding material.

・ Pneumatic switch for adding material

・ Adjustable adhesive adding device

・ Spray system with hose metering pump, eccentric peristaltic pump or pressure vessel, single, dual or airless nozzles.

・ Semi-automated or fully automated control of single equipment and automated management of production lines and surrounding systems with prescription storage ・ Explosion protection.

・ WIP system.

・ Heating and cooling with interlayer, including temperature control.

・ Organic solvent recovery system.

・ Devices connected to the whole pellet package.

・ Clean room engineering.

 

Technical Parameters

 

   GHL30   GHL50   GHL100   GHL150   GHL200   GHL300   GHL400   GHL600   GHL800   GHL1000   GHL1200 
Trough   Total volume   L 29 56 110 175 210 345 410 620 802 1005 1295
  working volume   L 8-21 15-40 35-85 55-140 65-165 105-275 125-325 190-495 240-640 250-700 390-1035
 Drive system     Rotating speed of mixing paddle     r.p.m  30-500 25-400 8-250 6-202 6-202 5-170 5-170 4-149 4-126 3-126 3-103
  Motor power   kw 5.5 5.5 11 15 15 22 22 30 37 45 55
  Cutting knife speed    r.p.m 300-2800 150-1400
  Motor power   kw 1.5 1.5 4 5.5 5.5 7.5 7.5 11 11 15 15
 Size Weight   Elder   mm 2110 2110 1850 1950 1950 2300 2300 2500 2700 2700 3000
  Total height   mm 1600 1600 2700 2700 2700 2920 2950 300 3200 3200  3300 
  Outlet height   mm 800 800 700 700 700 800 800 800 800 900 900
  Lenient   mm 700 700 870 950 950 1130 1130 1300 1330 1480 1580
  Weight of a machine   kg 400 450 1200 1500 2+60 1850 2200 2500 2700 3600 4500

 

XML 地图